MR491774 MITSUBISHI 4M41 B13 Power Steering pump

MR491774 MITSUBISHI 4M41 B13 Power Steering pump

FLUSHING INSTRUCTIONS 

When flushing the system, pour some of the oil from the system through a napkin or coffee filter. If metal particles are found, the pump must be replaced. Proof that this procedure was followed must be noted on the repair order for warranty to be valid. All port threads were in good condition after assembly and testing. Use proper torque specifications when tightening the power steering hose fitting. DO NOT flush the system or clean parts with brake cleaner, carburetor cleaner or engine degreaser fluid. Only use power steering fluid. Please reference our recommended fluid list on the back of this page to ensure proper flushing. 

BLEEDING INTRUCTIONS 

BEFORE BLEEDING; Inspect steering system. Check, and correct as needed Hoses must not touch any other parts of the vehicle. Steering system noise could be caused by a hose touching the frame, body or engine. All hose connections must be tight. Loose connections must be tight. 1. Switch ignition off.。 2. Turn steering wheel full left. 3. Fill fluid reservoir to “Full Cold” leave cap off. 4. Raise front wheels off ground. 5. With an assistant check fluid level and condition, turn steering wheel lock-to-lock, holding 5 seconds in between each turn, at least 20 times

Details

DKM Steering Pump packing box

Steering Pump Fixing Explanatory Drawing

Factory Show